- You must select exactly 2 choices for Lens size.
- "Lens size" is a required field.
- "Rotary" is a required field.
300W MOPA Fiber Laser Machine
$9,900.00
The Max Air-Cooled Performer. 120W MOPA delivers extreme speed and consistency for deep relief and production cutting of thin metal. The ultimate air-cooled solution for large-field marking and full-spectrum color control. Power your toughest jobs, effortlessly.
More views
Overview
The 300W MOPA sits one step below our 350W flagship in the M7 catalog. Architecture is identical warranty is identical (3 years on source plus machine), the differences are 50 W less average power (about 14% lower throughput on production deep marking workloads) and a meaningfully lighter chassis. The 300W appeals to production buyers who want top-tier capability without the 350W’s heavier freight weight or longer factory lead time.
The application range matches the 200W M7 and 350W M7 directly: deep engraving on hardened tool steel and cast iron, heavy industrial valve traceability, thin metal cutting up to roughly 1.3 mm stainless, mold cavity work, and high-throughput production marking on metal parts. The 300W is the sweet spot for shops that did the math on 350W and concluded the 50W extra power didn’t justify the heavier crate, slower lead time, and higher power consumption.
What you get from JPT Laser Shop: a verified JPT M7 source (300W tier, model code on source ID plate per shipment), the Sino-Galvo SG7110 production scanning head, DDP shipping with customs and duties paid by us for US, Canada, and EU buyers, and the 3-year warranty on both M7 source and machine. The 300W ships from the same factory line as the 200W and 350W; production quality and post-sales support are identical across the M7 tiers.
Technical specifications
Laser source, JPT M7 300W
Spec transparency: the 300W M7 source is not in the same JPT YDFLP datasheet PDF as the 60/80/100/120/200/350W tiers we have on file. JPT produces the 300W tier with the same M7 architecture (MOPA, 48 V DC, air-cooled, M² less than 1.6 expected) at proportional specs to the 200W and 350W. The exact 300W model code is verified on the source ID plate per shipment and can be cross-referenced with JPT directly. Values below are based on the M7 architecture pattern with explicit notes where the exact 300W spec is pending the dedicated datasheet.
| Source family | JPT M7 series 300W tier |
|---|---|
| Architecture | MOPA, EM7 |
| Average output power | > 300 W |
| Wavelength | 1064 nm |
| Pulse width range | 2 to 500 ns (M7 family standard) |
| Pulse frequency range | 1 to 4000 kHz |
| Maximum pulse energy | 1.5 mJ (M7 family standard above 80W tier) |
| Beam quality M² | < 1.6 expected (M7 200W and 350W both at < 1.6) |
| Cooling method | Air-cooled (M7 family standard through 350W) |
| Supply DC voltage | 48 V |
| Estimated max power consumption | ~ 1000 W (interpolated between 200W’s 800W and 350W’s 1200W) |
| Source net weight | ~ 26 kg (interpolated) |
| Armored cable length | 5 m |
If exact 300W datasheet specs are critical for your application engineering or for compliance documentation, email us before ordering and we will request the dedicated 300W M7 datasheet from JPT.
Scanner + complete machine
| Scanner | Sino-Galvo SG7110, 10 mm aperture, ± 11° scan angle |
|---|---|
| Marking speed | up to 6000 mm/s |
| Working area | 175 × 175 mm with 175 mm lens; 70/110/210/300 mm options |
| Power input | 110 to 240 V AC, 50/60 Hz |
| Cooling | Air-cooled (no chiller required) |
| Software | EZCad 2 and EZCad 3 included |
| Warranty | 3 years on JPT M7 source and machine |
What this machine can do
Five canonical workloads at the 300W tier:
Heavy industrial deep engraving
Cast iron data matrix marking, hardened tool steel serialization, thick valve flange marking. The 300W reaches 0.6 to 0.9 mm depth in production-feasible cycles on hardened metals.
Thin metal cutting up to 1.3 mm
Stainless 0.5 to 1.3 mm, brass 0.3 to 0.9 mm, copper 0.3 to 0.7 mm. The 300W cuts roughly 13% slower than the 350W at the same thickness.
Industrial valve and flange traceability
Cast iron and steel valve body marking with permanent data matrix codes. AVK-class production traceability at slightly lower per-shift throughput than 350W.
24/7 production line marking
Date codes, lot numbers, vector logos at line speed. The 300W duty cycle margin handles multi-shift production without thermal throttling.
Tool and die marking
Hardened steel mark survival through subsequent heat treatment and surface processing. Same capability as 200W and 350W M7.
How this compares to adjacent models
| Specification | 200W M7 | ★ This machine 300W M7 |
350W M7 |
|---|---|---|---|
| Best for | Industrial sweet spot | Heavy production, lighter than 350W | Flagship deep marking + thin cutting |
| Average power | > 200 W | > 300 W | > 350 W |
| Pulse range | 2-500 ns / 1-4000 kHz | 2-500 ns / 1-4000 kHz | 2-500 ns / 1-4000 kHz |
| Beam M² | < 1.6 | < 1.6 | < 1.6 |
| Cooling | Air-cooled | Air-cooled | Air-cooled |
| Lead time | 2 to 3 weeks | 3 to 4 weeks | 3 to 4 weeks |
| Crate weight | ~ 55 kg | ~ 65 kg | ~ 75 kg |
| Thin metal cutting | up to ~1.0 mm | up to ~1.3 mm | up to ~1.5 mm |
Practical guidance: choose 300W over 200W when production deep marking is the bottleneck and you need 50% more power. Choose 300W over 350W when the 17% extra power at 350W doesn’t justify the 13% heavier crate and the slight extra freight cost. Stay at 200W if your work doesn’t actually need more than 200W of average power. See the full fiber laser comparison →
What’s in the box
- 2 quartz (fused-silica) field lenses of your choice from 70, 110, 175, 210, or 300 mm
- 1 rotary attachment of your choice: D60, D80, or D100
- Motorized Z-axis
- Wavelength-matched safety glasses
- Foot pedal
- Marking head with lens fitted, USB + Ethernet + region power cable
- EZCad 2 + EZCad 3 software USB key
- Quick-start guide, cleaning kit, spare lens wipes
- 3-year warranty registration
Optional checkout upgrades: 2.5D EZCad 3 Z-control unlock (USD 750), Feeltek dynamic-focus 3D head (USD 5,500).
Software and upgrade options
This machine ships with the standard Sino-Galvo SG7110 galvo head and EZCad 2 software included on USB. Two optional factory upgrades extend what the machine can do; either can be configured at the time of order.
Base configuration: SG7110 head + EZCad 2 + LightBurn via adapter
The standard configuration covers all flat-surface 2D marking applications. EZCad 2 is the most widely used fiber laser control software in production environments, with full support for variable text, serialized marking, photo engraving, vector imports, and TCP/IP and I/O integration for production lines. LightBurn is supported via a USB adapter that ships with the machine for operators who prefer that workflow.
2.5D upgrade: BJJCZ G3 Pro head + EZCad 3 (USD 750)
This upgrade replaces the SG7110 with the BJJCZ G3 Pro head and adds EZCad 3 software (included). What you gain: stepped Z-axis control during a single design pass. The laser can mark at two or three different focal heights on the same workpiece without manually re-cranking the Z between layers. Right for stepped workpieces, terraced parts, deep-engraving multi-pass jobs, and any application where distinct height layers need to be marked in one sequence.
Full 3D upgrade: Feeltek FR10-F dynamic-focus head + LenMark (USD 5,500)
The FR10-F steers focus in software (LenMark) and uses no swappable field lens — it is offered in 100 × 100 mm and 200 × 200 mm field sizes.
This upgrade replaces the SG7110 with the Feeltek FR10-F 3D dynamic-focus head and adds LenMark software (Feeltek’s controller-side 3D mapping and design-wrap software). What you gain: continuous focal-length adjustment as the galvo mirrors point the beam across a curved or three-dimensional workpiece. The beam stays at true focus across the full surface in real time, not just one calibrated band.
When to choose the 3D upgrade: production volume on curved workpieces. If you are running dozens to thousands of curved parts per shift (rounded glass bottles, watch case-backs, ceramic vials, headphone shells, lampshades, contoured metal parts), the 3D head pays back through faster cycle time and consistent edge-to-edge focus quality. For one-off curved jobs the standard fixed-focus head with manual Z repositioning still works, but the cycle time per piece is significantly longer. The math typically points to the 3D upgrade once you commit to a recurring production run on curved parts.
Our 3D engraving guide walks through the complete Feeltek-plus-LenMark workflow from CAD model to engraved curved part. The guide is written for UV but the CAD-to-LenMark process is identical on fiber.
Marking area by lens
The included lens choice determines the marking area on the workpiece. Every JPT machine ships with two lenses of your choice from the standard set; the 175 mm lens is included by default unless you specify otherwise at checkout.
| Lens focal length | Marking area | Best for |
|---|---|---|
| 70 mm | 70 x 70 mm | Small jewelry, watch components, fine detail at maximum resolution |
| 110 mm | 110 x 110 mm | Medium parts: dog tags, challenge coins, small electronic enclosures |
| 175 mm (default) | 175 x 175 mm | General production: tumblers, plates, mid-size parts, the most common pick |
| 210 mm | 210 x 210 mm | Larger flat parts: serving trays, panels, batch marking |
| 300 mm | 300 x 300 mm | Maximum area: large panels, batch grids, low-detail full-field engraving |
Shorter focal lengths give finer beam spots and higher detail resolution at the cost of a smaller marking area. Longer focal lengths cover more area at the cost of slightly softer detail. Most production shops run two lenses (one shorter, one longer) to cover the working range without swapping mid-job.
Configuration and capability summary
| Configuration | Head | Software | Use case |
|---|---|---|---|
| Base (standard) | Sino-Galvo SG7110 | EZCad 2 (USB), LightBurn (via adapter) | Flat-surface 2D marking |
| 2.5D upgrade (USD 750) | BJJCZ G3 Pro | EZCad 3 (USB) | Stepped or terraced workpieces, multi-height marking |
| 3D upgrade (USD 5,500) | Feeltek FR10-F dynamic-focus | LenMark (Feeltek) | Curved 3D workpieces in production volume |
Both upgrades are installed at the factory at the time of order. Adding either later requires shipping the machine back as a service exchange, which is doable but takes longer than ordering with the upgrade up front. If you know at purchase that you will be marking stepped or curved workpieces in volume, configure the upgrade at checkout.
Shipping and delivery
Lead time: 3 to 4 weeks factory build. The 300W tier has lower JPT factory production volume than the 200W and 100W tiers, similar to the 350W lead time.
Shipping: DDP free to US, Canada, and the EU 27. Free shipping rest of world. The 300W crate is heavier than M7 sub-200W tiers but lighter than the 350W (~65 kg shipping weight). Lift-gate delivery is recommended at this weight. DDP transit is approximately 30 days by sea freight to US and Canada or 20 days by rail freight to EU 27, with customs and import duties included in the price. CIF air freight is available worldwide at 12 to 15 days transit if you prefer faster delivery and handle customs clearance yourself.
Crate: curbside standard, lift-gate available on request and recommended for the 300W weight. Full freight terms on the shipping policy page.
Warranty
3-year warranty on JPT M7 source and machine. Same terms as the 200W and 350W M7 tiers. Coverage includes manufacturer defects, source failure not caused by misuse, control electronics, and assembly.
30-day defect return window. We cover return freight in the original crate. Full text on the returns and warranty page.
Frequently asked questions
Why pick 300W over 350W?
Three reasons. First, freight: the 300W crate is roughly 10 kg lighter, which makes receiving easier for shops without a loading dock. Second, factory lead time is comparable (3 to 4 weeks both tiers) but JPT 350W inventory is tighter so 350W orders occasionally extend further. Third, power consumption at the 300W is ~17% lower than at 350W, which matters on multi-shift production economics over a few years. If 17% extra power matters more than these factors, go 350W; otherwise 300W is the practical choice.
Why pick 300W over 200W?
Throughput. The 50% power jump from 200W to 300W translates into roughly 35 to 45% faster cycle times on production deep marking workloads. If your 200W is running 80%+ duty cycle every shift, the 300W is the right step. The trade-off is heavier freight and longer lead time versus the 200W.
Is the cooling still air-cooled at 300W?
Yes per the JPT M7 family architecture. All M7 tiers in our catalog (60 through 350W) are air-cooled. No external chiller needed. Ambient temperature should stay 0 to 40 °C.
What is the actual 300W model code?
The JPT product code is in the YDFLP-300-M7-x-R family. The exact suffix (M-R versus other variants) is on the source ID plate of each shipped machine. The 300W M7 datasheet is not in the same PDF as the smaller M7 tiers in our reference library; if exact specs are critical for compliance or engineering documentation, email us before ordering and we will request the dedicated datasheet from JPT.
Can the 300W cut thicker metal than the 200W?
Yes, slightly. The 200W caps at roughly 1.0 mm of stainless; the 300W extends to about 1.3 mm. The 350W goes to about 1.5 mm. Galvo geometry caps the realistic cutting envelope around 1.5 to 2 mm regardless of power. For thicker sheet metal cutting (above 3 mm), use a CNC fiber laser cutter.
How long until delivery?
6 to 8 weeks total. Factory build 3 to 4 weeks; DDP transit is approximately 30 days by sea freight to US and Canada or 20 days by rail freight to EU 27, with customs and import duties included in the price. CIF air freight is available worldwide at 12 to 15 days transit if you prefer faster delivery and handle customs clearance yourself.
Are duties really paid for international buyers?
For US, Canada, and EU 27 buyers, yes. DDP shipping covers customs duties and import tariffs as part of the purchase price. Outside DDP zones, free shipping but customs is on you at destination.
Production deployment notes
The 300W tier is popular with industrial subcontract shops doing heavy production marking, tier-2 mold shops, and production lines that have outgrown 200W throughput but where 350W is more than the workload demands. Email us if you want to talk to a current 300W operator about throughput economics versus 200W and 350W tiers.
You may also consider
| Color | Black |
|---|
What it can mark
Sample marks shown are representative of this machine class. Ask an engineer for a free test mark on your own material.
Related products
Reviews
There are no reviews yet.